EXIT is a Rodenticide sold as a liquid concentrate in 4 litre containers. Each container is then mixed with 96 litres of water to produce 100 litres of field solution.

EXIT is applied into the ground squirrel burrows through a pump and hose assemble.

The volume of the tank is 400 litres and is standard with the EXIT application kit. The tank fits easily into the back of a pick up or on a trailer. It is equipped with an internal pick-up tube on the outlet to ensure all of the field solution can be used during application. It is equipped with a shut off and quick-connect fittings.

The Shur-Flo pump is a 12-volt demand pump producing 3.6 gallons per minute at 45 psi. The pump comes wired with alligator clips for connection to battery posts, and can be connected to the vehicle battery. It may be wired to operate off a lighter or trailer plug in as well.

The applicator kit comes with a standard hose reel and 100 feet of ½" flexible garden hose.

Marker cones are designed to both mark the ground squirrel burrows and contain the ground squirrels in the burrow as EXIT is applied. The cones have a hole in the small end and smaller holes part way up the body to allow EXIT foam to completely fill the burrow.

A 3-gallon per minute aspirating nozzle with an extended barrel is required to produce EXIT foam and deliver it into the burrow. Each kit includes 2 nozzles complete with shut off.

The EXIT application kit is equipped with all hoses and quick fittings to assemble and take down the system quickly and easily.